MENU
IMPORTANT - Videos and Spec Sheets for all inventory are available upon request.

Cincinnatti 12×72

$28,500.00

Hydraulic Universal Cylindrical Grinder
Wheelhead swivel left / right center: 90 degrees
Maximum distance between centers: 72″
Maximum swing over table: 12 15/16″
Grinding Wheel diameter: 18″, 5 HP motor
Table traverse infeed variable, speeds: 3 – 220 IPM
Hand table traverse per Rev / Handwheel: Rapid 15/16″ Slow 0.2″
Cross feed auto infeed / table revers: 0.0002″ – .0005″ low : .005″ – .0125″ high
Cross feed wheelhead / per handwheel: 0.50″ low / .250″ high
Minimum infeed on diameter: 0.00005″
Headstock motor: 1 HP
Taper hold in spindle: # 9 B & S
Work head speeds: 50 – 500 RPM
Spindle nose: # 5 Amer stand
Headstock swivel toward / away: 90 degrees / 30 degrees

Serial #: 2U3U5K-1
Category: Tag:

Want to know more? Detailed specs? Request a video?
Use the buttons below to call us or fill out the form to contact us!

(586) 296-2250

Machine Inquiry

Leasing and Financing Options are Available

Dimensions: 20’L x 6″W
Weight: 15,000 LBS

Equipped with:

  • Full Hydraulic operation, hydraulic table reverse
  • “Acrafeed” dual rate (coarse & fine feeds) plunge in-feed system
  • Pick feed (auto in-feed), rapid wheel head advance & retraction
  • Right / Left table tarry
  • Work Light
  • Coolant System
  • Re-Alignment- Table and subtable reground, re-scraped to bed ways.
  • Re-Aligned Headstock,Tailstock and I.D. spindle to proper center heights.
  • Rebuilt Hydraulic pump, cleaned and flushed lubrication system to ways.
  • Cleaned and flushed all hydraulic valves, lines, pump, etc.